Contact Us


       TEL : +86-592-5601702  5682036


       E-mail: sales@quarryingtools.com


       Address: Unit 8001, Part A, Minnan Culture Town, 

       No.350, Changle Road, Huli, Xiamen China.361006


                   




DTH Hammer Breakout Bench

DTH Hammer Breakout Bench

The threaded connections of the driver chuck and top sub may become very tightly tensioned during drilling.it is convenient to break the hammer threads on the rig.but if the threads can not be lossened or tend to get stuck, a breakout bench is the best solution.

DTH Hammer Breakout Bench

  • Size: 920*510*875 and 1100*620*875

  • Type or Model: Blhb-5 for 3-5" Hammer and Blhb-8 for 6-8" Hammer

  • Operate Hammers: 3" 4" 5" 6" 7" 8" Diameter Hammer

  • Key Word: Hammer Breakout Bench,Hammer Disassemble,

  • Market: Global

  • Aplication: DTH Hammer Demount/Dismant Tool

What is DTH Hammer breakout bench?

DTH Hammer breakout bench is for dismantling the outer cylinder of DTH Hammer and top sub position, we supply wrench size from 3inch to 8inch, it is easy and convenient to lossen the hammer threads, handly but powerful. 

 

How to use DTH Hammer breakout bench equipment?

1.Put hammer on the bench.

2. Fix K-shaped base with nut.

Note: Please make sure red point on the K-shaped base and red point on the bolt are at the same side.

 

3.Adjust the position of hammer and wrench;

   Use wrench to block the wrench flat of hammer;

   Let wrench and jack in the same face.

 

4.Fix wrench.

 

5. Shake handle of Jack slowly till top sub away from hammer

 

6.After top sub dismantled, release pressure of Jack and put hammer on the bench like above photo to dismantle drive chuck of hammer.

 

7. Fix K-shaped base with nut.

Note: Please make sure red point on the K-shaped base and red point on the bolt are at the same side

 

8. Fix hammer

 

9. Adjust the position of hammer and wrench;

   Use wrench to block the wrench flat of hammer;

   Let wrench and jack in the same face.

 

10. Shake handle of Jack slowly till dive chuck away from hammer.


 The working video for Hydraulic DTH hammer breakout bench for 6inch to 24inch


The working vieo for manual DTH Hammer breakout bench for 3inch to 8inch.





Operating principie

by hydraulic jack
  (manual)

Model

CX-5

CX-8

Operate hammers

3-5"

5-8"

Length

920mm

1100mm

Width

510mm

620mm

Height

875mm

875mm

Weight

350kg

350kg

dth hammer breakout bench 02.jpg

hydraulic DTH Hammer breakout bench.jpg




 


Nora Chen.jpg


Hot Tags: dth hammer breakout bench, China, manufacturers, suppliers, factory, customized, best, high-quality, CE certification
Inquiry